12 STEPS TO REPAIR THE SCREEN OF YOUR IPHONE



 To repair your iPhone screen can be challenging and it's generally recommended to have it done by professionals to ensure the job is done correctly. But if you're confident in your technical skills and want to attempt a DIY repair, here's a general guide on how to repair your iPhone screen:

It is worth noting that DIY screen repairs can void your warranty and may lead to further damage if not done correctly. Proceed with caution and consider professional repair options first before making attempt on self-repair of your iPhone.

STEP 1 (Things You Will Need)

1. REPLACEMENT SCREEN: Buy a high-quality replacement screen compatible with your iPhone model.

2. SCREWDRIVERS: You will need specific screwdrivers (Phillips, pentalobe, or tri-point) to have your iPhone opened.

 

3. PLASTIC SPUDGER: This tool is used to gently pry open the iPhone without damaging the casing.

4. TWEEZERS: It use for the handling small screws and delicate components.

 5. ADHESIVE STRIPS: These are used to secure the new screen in place.

6. HEAT GUN OR HAIR DRYER: To soften the adhesive around the edges of the old screen.

7. A CLEAN WORKSPACE AND A SOFT CLOTH : This will protect your iPhone and screen from scratches.

 


STEPS 2 (How to Replace The iPhone Screen)

1. POWER OFF: Make sure your iPhone is powered off.

2. REMOVE SCREWS: Use the appropriate screwdriver to remove the screws around the frame of your iPhone. Keep these screws organized.

3. PRY OPEN: Use a plastic spudger to gently pry open the iPhone. Start from the bottom or sides, but be cautious not to damage the internal components.

4. DISCONNECT BATTERY: Before working on the screen, disconnect the battery to prevent electrical damage. Locate and disconnect the battery connector.

5. HEAT SCREEN: Use a heat gun or hair dryer to soften the adhesive around the edges of the old screen. Be careful not to overheat it.

6. REMOVE OLD SCREEN: Carefully lift the old screen and remove it from the phone.

7. INSTALL NEW SCREEN: Attach the replacement screen in the same way you removed the old one. Be sure to connect all cables and components correctly.

8. SECURE SCREEN: Use adhesive strips to secure the new screen in place.

9. RECONNECT BATTERY: Reconnect the battery.

10. REPLACE SCREWS: Carefully replace all screws and make sure they are tightened properly.

11. TEST: Power on your iPhone and test the new screen to ensure that is working correctly.

12. SEAL AND CLEAN: Make sure the iPhone is properly sealed and clean any fingerprints or dust from the screen.

 

Please note that this is a general guide, and the specific steps may vary depending on your iPhone model. Each iPhone model has its own unique disassembly and reassembly process. It's strongly recommended to watch detailed, model-specific repair tutorials and read the repair manual for your specific iPhone model. If you're uncomfortable with any step or lack the necessary tools, it's best to seek professional repair services to avoid causing further damage to your device.

https://youtu.be/YVuRlWswx58

Comments

Popular posts from this blog